Posts Tagged ‘fertilizer’

Washington State Bill May End Up Taking the P out of Lawn Fertilizer NPK

Saturday, March 6th, 2010
Dandelions - a Lawn that Feeds and isn't Fed

Dandelions - a Lawn that Feeds and isn't Fed

Via email I received a report this morning from  Heather Hansen that Washington State Bill SB6289 died in the rules committee on Friday, March 5, 2010. This isn’t to say that future fertilization regulations won’t happen at some point, but don’t expect it any time soon. Read on for more in my original post on this proposed bill including a link to the bill history itself, which, by-the-way,  as of this morning is not reporting that the bill has died.

Original Post from January 27, 2010:

Yesterday I received an alert message from WSNLA lobbyist Heather Hansen regarding Washington State Bill SB6289’s status and potential impact on the landscape industry. The headline of the bill is “Protecting Lake Waters by Reducing Phosphorous from Lawn Fertilizers”.  And, as wording in the Bill itself states “Phosphorus loading of surface waters can stimulate the growth of weeds and algae and that this growth can have adverse environmental, health, and aesthetic effects;” (note: this is copy taken from one iteration of edits in the bill review process; this wording may change over time.).

Should this Bill become Law several specific changes may be forthcoming for lawn management companies according to Heather Hansen, WSNLA lobbyist including:

  • Dept. of Ecology gains authority over fertilizer rather than the Dept. of Agriculture. (sec. 2)
  • Different standards are set for solid and liquid fertilizer. (sec. 3)
  • Organic fertilizer is effectively banned (sec. 3)
  • Spills must be “immediately contained” — but enforcement and definition of these spills isn’t quite clear (sec. 4)

Having read through the copy of the bill Heather sent out, it seems that this bill will do nothing to limit fertilizer use by homeowners or limit fertilization for non-lawn use. I encourage you to read through the bill here and submit your feedback on it to the legislature. IMHO: while the idea of reducing lawn fertilizers is very necessary, this bill, as written,  needs some deeper refinement to make it effective and useful in protecting the environment and in protecting small business.

If you’re a Washington State Resident and wish to contact your legislators about this bill, you may look up their contact information here.

Read more about ecologically sound lawn care for the Pacific Northwest here.

Read more about Pollution Prevention in Landscaping here.

  • Share/Bookmark

Fertilizer? Compost? Lime? What Should I Do to Make My Soil Better and My Plants Thrive?

Saturday, February 20th, 2010

Most of the time my answer to most gardening questions is another question: “Have you tested your soil?”. Whether the question is “What should I add to make my soil better?” or “Why are my leaves so yellow?” or “Why aren’t my berries plump?” the answer may lie below the surface. What we so often ignore is that a large part of our plant’s life system is literally rooted in the soil. If the soil is out of whack, the plants are going to be out of whack.  And, if you’re growing edible plants, if your soil is toxic, your food may become toxic as well.

About a year ago, I wrote the following article about testing soil. And, for the most part, I think it is still valid. However, I’ve changed my mind about using home test kits and now prefer to ship my soil off to an accredited soil lab. Sure, doing a home test can be relatively inexpensive and it can be a fun family project. But, there’s also a lot of room for newbie user error. Plus, once you get your DIY results, it may take a lot of digging to come up with the answer to “Now what do I do?”.

Instead, for about the same price, sending samples off to soil labs like Amherst Soil and Plant Tissue Lab or Midwest Soil Labs or any number of other soil labs will get you much more information to work with. In addition to testing for pH, the labs will advise how, when and with how much of what to adjust your pH. They’ll check for heavy metal content and advise you if your soil is not only safe to grow food in but also if it is safe for your family to simply be in. They’ll check for all macro and micro-nutrient levels and provide suggestions for how to adjust for any that are overly or under abundant. And, their recommendations are not simply based on what they find in your soil sample but also on what you tell them you are or plan to be growing in your soil.

In my own garden this fall I sampled nine different beds and sent them into UMass for analysis. Within two weeks of shipping out my materials (and one week of their receiving it), I received an email with detailed analysis of my soil. The short of it: no heavy metals beyond naturally occurring levels, soil that needed liming to adjust pH, a need to add Nitrogen and in some cases relatively high Calcium and Magnesium and twice the level of desired organic material (oh well, it helps with moisture holding capacity in my sandy soil.) . Nothing surprising and a bit of relief. As regular readers know, I grow a lot of food. And, I’ll admit it, shamefully, I had never checked my heavy metal levels in the past. Now I know it’s safe.

So, what’s the next step? Over the past few days in near 60F Seattle sunshine, I pulled weeds, weighed dolomitic lime and worked with Bob to amend my dormant beds that needed it. Once the rain does its work helping the lime convert in the soil, I’ll be adding blood meal to the beds that need it. Next fall, as per the lab recommendations, I’ll use a home kit to check my pH, which may again get a bit too acidic. If it does happen, I’ll add more lime (in smaller ratios as the lab suggested) to keep the pH corrected. And, yes, I’ll be adding composted material to the beds as well. Yet, as I work to neutralize my pH, I’ll also need to reduce the amount of fertilizer (by this I mean things like blood meal and compost) I add. Since my soil is already filled with decent nutrient levels, it will be critical not to over-fertilize. Yep, this can happen. And, not only can it cause Nitrogen burns to my plants, but it can also create Aluminum and other toxicity to my plants along the way.

Sure, it seems complicated, but with 9, $15 lab tests in my file, I feel armed to take on the soil!

Read on for the original post and learn more about DIY home kits here:

(Original Post from February 16, 2009)

It’s that time of year when just about every client is asking  Is it too late to mulch my beds? or  What kind of fertilizer should I put on my plants? or I just read I need to lime my garden to make it sweet; what does that mean? Now that a few winter bloomers are showing their stuff, the sun is making an occasional reappearance, newspapers are running “what to do in the garden this month” pieces, and the Northwest Flower & Garden Show is opening in 3 days, the race to dive into spring is on in Seattle. And, soil care is a good place to focus.

Simple At-Home Soil Test Kit

Simple At-Home Soil Test Kit

When I get these soil care questions — even if the fertilizer question is about a plant, I consider it a soil issue — I try to start by educating clients on how plants interact with soil at different times. That explanation is a little deeper than I’m going to go into here, but let’s start by answering the three questions listed above.

The first answer to all of these questions is to ask whether the client has tested their soil. Without knowing what is already going on with the soil, it’s nearly impossible to generalize about what should be added to it. Pick up a simple at-home soil test kit for under $20 here.

Is it too late to mulch my beds? It isn’t too late to add composted mulch to beds to top dress them. Heck, I find myself out spreading mulch in all seasons. Mulch does more than just add nutrients to the soil. It also encourages soil microbia to establish healthy populations in the garden, and their work builds soil tilth. As well, it protects roots and discourages weeds. So, yes, mulching can be done now. However, mulch alone may not solve every garden issue. As well, too much woody mulch (for instance) can change the soil’s nutrient and pH balance over time. So, again, testing your soil is a good idea.

What kind of fertilizer should I put on my plants? My first response to this question is don’t add a fertilizer now. If you intend to quick feed your plants, right now isn’t the time to do it. When the soil is cold and plants are still dormant for winter, fertilizers just plain don’t work. Plants don’t use the material, so you waste money putting them down. Plus, the fertilizers then leach through out soils and into the water tables with a little help from all our winter rains. So, don’t try to add fertilizers to your soil now. However, now is a good time to take soil samples to send out to a lab or test at home with a small soil testing kit to get an understanding of what your soil macro (and possibly micro) nutrient needs are.

Last weekend, I used my soil core sampler to take several soil cores from my own garden. My biggest curiosity is about beds for edibles. By growing plants that I expect to yield food, I’m asking a lot of the soil. I’m taking a lot of the nutrient value from it over and over, so it’s important that I figure out what I need to give back to it to ensure good harvests and a healthy long term eco-system.

I kept each soil sample for each section of the garden isolated in an open bag. I let the soil dry out for a week, and sifted out much of the organic matter. I then ran three simple tests on the samples from each area of the garden: one for pH, one for Nitrogen (N), one for Phosphorus (P), and one for Potash/Potassium(K). Although I tested from three different areas of the garden, I learned that in general my garden is Nitrogen deficient, has varying deficient/adequate levels of Phosphorus, and has an abundance of Potash.  Knowing this, I’m able to then select what to add to the garden beds later in the season to adjust the Nitrogen and Phosphorus deficiencies.

Because I want to add a slow release material that won’t leach right though the soil, and because I don’t want to add a lot of Potassium, I’ll probably be adding something like a blood & bone meal amendment a little later in the season. (Honestly, I’m still looking over my options and prices, so look for more thoughts on this later. Worm teas and some seed meals may be other nice options.) Since I’ll be adding slower release materials, I will want to add them to these beds just as the soil warms a bit. This is when the soil microbia as well as the plant roots begin to seek out these materials. As the soil microbia process the materials, their excretions will contain nutrients in forms that plant roots will happily take up.

pH ~ 6.5 = Slightly Acidic & Great for Most Edibles

pH ~ 6.5 = Slightly Acidic & Great for Most Edibles

But, before I gave up on doing anything with my soil this season, I also wanted to look at the pH of my soil. In the Seattle area our soils tend to run acidic. Rain and leaching contributes to that trend. Many plants live happily in the slightly acidic to neutral range, but too acidic and plants just won’t thrive. Primarily, when living in a pH range they don’t like, they won’t be able to take up soil nutrients/fertilizers properly. So, they won’t thrive. Plus, any nutrients we add to the soil again will just leach out into the water table. It’s a waste.

A pH test is about the easiest test you can run at home. I don’t like the electronic soil test meters. I find they register the same thing everywhere. A little chemistry kit that runs less than $10 will tell you your pH.

When I ran my pH test, my soil was very acidic in a bed that had been filled with acid-loving rhodies and camellias; it came in at 5.0. My other beds came in around 6.3-6.5, which is slightly acidic and generally good for the edibles I plan to plant in these beds. The bed running 5.0 will need to be adjusted by adding lime.

It is very important to test soil before randomly adding lime, which I know many gardeners “just do”. Which kind of lime you add, how much, when you add it, and what you mix (or don’t mix) it with, is important. Too much lime, and your garden may start trending toward alkaline. Less of the plants that we like to grow in our area will thrive in alkaline soils than will in acidic/neutral soils. Plus, depending on the kind of lime you add, you can have a rapid conversion that doesn’t last a long time or a slow conversion that lasts a long time. Knowing what kind of lime you’re adding, and when is very important. But, mostly, you should verify whether you need the lime or not in the first place. And, finally, it is important to add lime before you add composts and fertilizers to the soil. Lime can take anywhere from 2 weeks to a month to start doing its job, and it needs water to do so. This means the lime can/should be added around this time of year while our rains are still steady and before the time arrives to start adding fertilizing soil amendments to the garden.

I realize this article may leave you with more questions than answers. Heck, I didn’t even get into testing for soil texture/amount of sand, silt, clay in the soil. That’s a whole other soil science discussion. If you’ve got lingering questions about your own garden soil or soil testing, feel free to post them here or sign up for a garden coaching session for help learning more in person, in your own garden spaces.

  • Share/Bookmark

Is Your Garden Soil Ready For Fall Planting?

Tuesday, October 21st, 2008

Yesterday, I worked with a client to install shrubs along his foundation. When he bought his new home earlier this year, the sellers had left a mishmash of polka dot plantings along the south side and a grassy mess of spiraea along the west side foundation. The polka dots were clearly the result of a “what’s at Home Depot? Let’s buy a bunch of stuff to fill in some blanks”. The spiraea was probably somebody’s summertime idea of a fun hedge that went wrong when it met winter and the grass moved in. In any case, my client had cleared the beds fairly well for us to put in the new plants, but we ran into a couple of common issues that slowed us down.

  • Grass Weeds in the Planting Beds: My client had hired a “clean up” crew to clear out the weedy, overgrown beds. Unfortunately, in some areas they didn’t do a great job. The west beds were fully infiltrated with running grass weed. In parts of the beds, the clean up crew cleared out a lot of grass. Anyone who has fought grass in beds knows that this can be an ongoing battle. The smallest segment left behind can result in a fresh crop of annoying weed. In other areas the clean up crew had essentially mowed over the weedy grass and left large growths of it fully intact in the planting beds. So, what to do in situations like this?
    • Clearing out the weeds now will save you later. Working together, we finished clearing as much of the loose grass weed as we could and followed up each section with planting the new shrubs. In the areas where the grass is thick and was “mowed”, my client is going to completely dig out the grass before planting. Getting the grass cleared and the bed re-edged is going to make his life a lot easier down the road.
  • Hydrophobic Soil: In western washington, the fall rains have started to return following our natural summer drought cycle. Unfortunately, many soils are still fairly dry in the planting root zones. In foundation planting beds this often is the case at any time of year as the house may create a drip zone “rain shadow” that keeps the soil from getting well saturated. And, some soils like my client’s fairly sandy soil, the water just runs through the profile. Plus, once soils get dry, they can seem difficult to get wet again. The water pools; the soil floats in it. In these cases, it can take a while to get the water to penetrate the soil to keep it moist. This is what we rain into yesterday. So, what did we do?
    • My client’s soil does have some clay and some organic matter. Together these will help the sandy soil hold moisture — once it gets wet. I suggested that we water the beds ahead of planting (and water the rootbound plants at the same time). It seemed strange to get out the hose while we were working in the rain, but we did.
    • Don’t turn the hose on full blast and try to get the soil moist. Instead, be patient and use a slow drip or light rainshower spray to moisten the soil. If you use a big jet stream, the water will pool and run off.
    • Water slowly and intermittently. Water one section slowly, move to the next section and repeat a few times. Let the water drain between each watering. Check the soil moisture depth periodically. Remember, you want the soil moist down where the roots are going, not just in the top few inches.
    • Plant after the soil is moist and the soil has drained. Make sure the plant roots are moist going into the soil. Water each plant on a slow drip after planting.
    • Check newly planted plants occassionally, even if you think they’re getting rain. You may need to add supplemental water to ensure they do well.

A couple of final notes on fall planting. We did not add fertilizer to the new plantings. This time of year we don’t want to encourage the plant to put on a lot of top growth that might get zapped if we have a freeze. Instead, we want the plants to do their work underground until spring. So, add a good couple inches of composted mulch to the top of the finished planting beds. As this decomposes through the work of rains and microbial activity, slow release fertilization will be available to the plants by spring when they really want and can use it.

Fall is a fantastic time to transplant and renovate gardens. It’s just important to stay in tune with the environment in which you are working.

  • Share/Bookmark